The 2GIG Smoke Heat Freeze Detectors are designed to recognize smoke from common synthetic materials and decrease nuisance alarms from everyday cooking. Using advanced detection algorithms and a sophisticated photo-electric optical sensor.

UL 217 & UL268 Smoke Alarm Standards bring 250 new technological changes to traditional smoke detection. Meeting the new UL standards the 2GIG Smoke Heat & Freeze Detector provides increased performance and better detection of smoke including smoke from common synthetic materials found in home furnishings. These synthetic materials generally have a faster burn rate reducing escape time from an average of 17 minutes to 3-4 minutes.

• Meets new UL217 8th edition and UL268 7th edition requirements.
• Designed to recognize smoke from some synthetic materials.
• Monitors and reports on excessive temperature variations.
• Optical smoke detection chamber for improved smoke detection.
• Rate of Rise alert is sent to the panel and
• a siren is triggered once the room temperature is 104 F and the temperature rises 15 degrees or more in one minute.
• Extreme high/low temperature alerts.
• Long-lasting battery with projected life of 10 years.
• 2-year product warranty.

• Wireless Signal Range: 350 ft (106.7m) open air with Wireless Control Panel
• Transmitter Frequency: 345 MHz
• Compatibility: works with GC2e and GC3e Panels only
• Supervisory Interval: 70 minutes
• Dimensions (D x H): 4.7 x 2.3 inches (120 x 58 mm)
• Weight: 0.46 lbs
• Audible Alarm: > 85dB (A) at 10ft (3m) minimum
• High Temperature Level: 134F ⁄- 4F
• High Temperature Rate of Rise: Temperature above 104F and increases 15F or more in one minute
• Low Temperature Level: 40F ⁄- 4F. Reset at 45F ⁄- 4F
• Operating Temperature: -40° to 100°F (4.4°C to 37.8°C)
• Operating Rel. Humidity: 15% to 95% non-condensing