YG80

0 Review(s) 
YG80 DORMAKABA 11 240 Lbs Bolt Lock Force / Weather / Supports Corrosion / Extreme Weather YG80
DORMAKABA
YG80
Sorry, This item is out of stock.

YG80 DORMAKABA 11 240 Lbs Bolt Lock Force / Weather / Supports Corrosion / Extreme Weather

Features

  • With an 18 mm (.705”) diameter stainless steel bolt pin and reinforced strike design the YG80 has a holding force of 11 240 lbs.
  • Concealed mounting bolts under the lock’s cover which cannot be removed without triggering the tamper detection monitor.
  • Completely weatherproof. Ingress protection to IP67.
  • Aluminum lock body for superior corrosion resistance.
  • Built-in heater for continued functionality in colder climates the YG80 can handle any environment it is placed in.
  • Complete Monitoring – YG80 can truly become a part of the access control system with a range of output signals including: bolt locked and unlocked position door position and tamper detection.
  • Low current consumption.
  • With the heater disabled the YG80 will draw as little as 50 mA in standby  and only 1 000 mA in operation at 12VDC. (Heater 24VDC only).
  • Integrated access control system capabilities.
  • Selectable fail safe / fail secure modes three user selectable control methods  and multiple attempts to lock or unlock ensures that the YG80 is ready for a wide range of application requirements.
  • A symmetrical design means the YG80 can be installed both horizontally and vertically in indoor and outdoor environments.
  • The included 3 meter (9.04’) flying cable ensures easy connection for all the monitoring control and the 12-24VDC power supply.

 

Specifications

  • Door gap – 15 mm (.590”) Max
  • Static strength – 11 240 lbs.
  • Dynamic strength – 148 ft-lbs.
  • Endurance – 300 000 cycles
  • Voltage at lock – 12-24 VDC /- 15%
  • Auto relock – Will attempt to lock or unlock 3 times if obstructed during operation
  • Current usage – Standby current: 50mA 12V; 40mA 24V; 1.6A 24V with heater on. Maximum current: 1.0A12V; 0.5A 24V; 2.0A24V with heater on
  • Monitor switch ratings – 24VDC 0.25A

Environment:

  • IP67 Rating – suitable for indoor and outdoor use
  • Cold - – 35 degrees C
  • Dry heat - 70 degrees C
  • Corrosion – 240 hours salt spray
  • Certifications and listings: FCC – Title 47 part 15 subparts A & B – Class B device ISED (IC) – ICES-003 – Class B device UL – UL294 CSA 22.2 No 204 CE – EMC 2014/30/EU RoHS 2011/65/EU

Operation Video:

2024-02-23 11:55:29

Page: 6

DORMAKABA
YG80

Reviews

No customer reviews for the moment.

Write your review

YG80

YG80 DORMAKABA 11 240 Lbs Bolt Lock Force / Weather / Supports Corrosion / Extreme Weather YG80

Write your review