600-SSHG CAMBIUM NETWORKS Gigabit Surge Suppressor (56V) 10/100/1000 MBPS - C000000L033A

Network operators should always follow best-practices for grounding and lightning protection. Doing so will minimize network outages and reduce the associated costs of tower climbs and equipment repair/replacement.

The Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber Module) PTP 450i and PTP 820S. The unit ships are suitable for mounting to a wall or pole.

SPECIFICATIONS
- TRANSFER RATE: 1000 Base-T
- CONNECTORS: Two x RJ-45
- NOMINAL VOLTAGE: 56V
- PROTECTION MODE: Line-to-line and line-to-ground
- SURGE ARRESTOR: TVS Diodes (Transient Voltage Suppression for longer operational life)
- SURGE CURRENT RATING L-G total: 172A 10/1000us
- RESPONSE TIME: 5 nanoseconds typical
- MOUNTING: Pole or wall mount
- DIMENSIONS: 4.6 in. x 3.4 in. x 1.8 in.(118mm x 87.5mm x 46.5mm)
- WEIGHT: 0.34 lbs (156 gm)
- WIND SURVIVAL: 200 mph (321 km/hour)
- OPERATING TEMPERATURE: -40° F (-40° C) 140° F (60° C)
- HUMIDITY: 100% condensing
- ENVIRONMENTAL PROTECTION: IP54 (Dust and Water Intrusion Protection)
 

2024-02-23 11:55:24

Page: 5