CM-6 MACURCO - AERIONICS Carbon Monoxide Detector Controller and Transducer

• Power: 3 W (max) from 12 to 24 VAC or 12 to 32 VDC

• Current 24 VDC: 75 mA in alarm 50 mA fan relay on and 23 mA stand by

• Shipping Weight: 1 pound (0.45 kg)

• Size: 4 1/2 x 4 x 2 1/8 in. (11.4 X 10.2 X 5.4 cm)

• Color: Dark gray • Connections: plugs/terminals

• Mounting Box: (not included) 4x4 electrical

• Fan Relay: 5 A 240 VAC pilot duty SPDT latching or non-latching

• Fan Relay Actuation: selectable at “dIS” (disabled) 15 ppm 25 ppm 35 ppm (default) 50 ppm or 100 ppm

• Fan Delay Settings: 0 1 3 (default) 5 and 10 minutes

• Fan Relay Minimum Runtime Settings: 0 (default) 3 5 10 or 15 minutes

• Alarm Relay: 0.5A 120 V 60 VA

• Alarm Relay Actuation: selectable N.O. default or N.C.

• Alarm Relay Settings: dIS 50 ppm 100 ppm 150 ppm and 200 ppm (default)

• Current Loop: 4-20 mA for 0-200 ppm

• Operating Environment: 0°F to 125° F (-18°C to 52°C) 10 to 90% RH non-condensing

Carbon Monoxide Detector and Controller

The MACURCO CM6 is a low voltage detector controller and transducer with a built-in double relay selectable output selectable output from 4-20 mA buzzer and digital screen is an electronic detection system used to measure the concentration of CO and provide feedback and control the automatic fan/extractor to reduce the concentration of CO in parking lots maintenance areas and other commercial applications.

Features:

- UL list

- Mounting standard electrical box 4 "x 4"

- Factory calibrated

- Activation of the selectable fan relay in 15 25 35 (by default) 50 or 100 ppm of CO

- Capable of showing concentrations of CO in the range of 0 to 200 ppm

- Alarm relay of NA or NC 0.5 A

 -Fan relay: SPDT 5 A

- Design of supervised system: a problem in the detector will activate the fan and alarm

- Dimensions: 114 X 102 X 54 mm

2023-09-27 00:55:26

Page: 8