SD365R-IV FIRE-LITE Addressable Photoelectric Smoke Sensor With Remote Test Capability In Duct Applications Use With Fire-Lite Addressable Panels

Models SD365R and SD365R-IV are plug-in type smoke sensors that combines a photoelectronic sensing chamber with addressable-analog communications. When used in duct applications with a DNR(W) testing can be done remotely using approved System Sensor test accessories eliminating the need for a test coil. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial switches are provided for setting the sensor’s address.

Features

• Agency Listings and Approvals: UL ULC FM and CSFM 
• New modern profile
• Analog communications
• Low standby current
• Rotary address switches
• Dual LEDs for 360° visibility
• Expanded color options including white and ivory
• Includes 6” mounting base and trim ring

Specs

Operating Voltage Range: 15 to 32 VDC
Operating Current 24 VDC: 200 uA (one communication every 5 seconds with green LED blink on communication)
Maximum Alarm Current: 2 mA 24 VDC (one communication every 5 seconds with red LED solid on)
Maximum Current: 4.5 mA 24 VDC (one communication every 5 seconds with amber LED solid on)
Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing
Operating Temperature Range: 32°F to 122°F (0°C to 50°C) -4°F to 158°F (-20°C to 70°C) in duct applications
Air Velocity: 0 to 4000 ft./min. (0 to 1219.2 m/min.)
Height: 2.0 (51 mm) installed in B300-6 Base
Diameter: 6.2 (156 mm) installed in B300-6 Base; 4.1 (104 mm) installed in B501 Base
Weight: 3.4 oz. (95 g)
Isolator Load Rating: 0.0063

2023-11-21 21:55:37

Page: 8