- New
- Out Of Stock - info [email protected]
HX80NRAM
HX80NRAM OPTEX High Mount Outdoor Pir Detector / 24 m / detector with Anti-Masking
The iSeries HX-80NRAMi is a high mount battery-powered outdoor passive infrared detector with Anti-Masking that provides the stability and reliability necessary for an outdoor PIR sensor. The iSeries version comes with an Inovonics EN1941 transmitter and batteries pre installed and allows installers to save valuable installation time and labor costs because no trenching installing conduit or pulling wire is required. The most important element in reliable outdoor detector is accuracy to distinguish a human from a small animal. The exclusive pyro element on board enables the HX to project an ideal detection pattern thus allowing for more accurate detection of humans and less false alarms. In addition the HX-80NRAMis dual PIRs and 20 detection zones utilize the AND detection pattern technology - upper and lower detection areas have to be activated in order to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The HX Series detection length can be limited to avoid unwanted detection and its short range zones can be masked if needed. By limiting the detection range false alarms due to unwanted movement (cars persons or animals outside the protected area) can be eliminated.
Model | HX-80NRAMI |
---|
Model | HX-80NRAMI |
---|---|
Wireless Technology | Includes Inovonics EN1941 and batteries built in |
Anti-masking | Yes |
PIR Coverage | 80 x 67" (24.0 m x 2.0m) narrow/ 20 zones |
PIR Distance Limit | 22 33 42 59 (6.5m 10.0m 13.0m 18.0m) |
Detectable speed | 1/s - 411"/s (0.3 m/s -1.5 m/s) |
Sensitivity | 3.6°F (2.0°C) at 0.6 m/s |
Power Input | (2x) 3 V DC Lithium Battery (Included) |
Operating Voltage | 2.5 - 9 VDC |
Current Draw | 30uA (standby)/ 4 mA (max) at 3 V DC |
Alarm period | 2.0 /- 1sec |
Warm-up period | Approx 90 sec (LED blinks) |
Alarm output | Form C-Solid State Switch: 10 V DC 0.01 A max |
Tamper output | Form C: 28 V DC 0.01 A max activates when cover removed |
Trouble output | N.C./N.O. Selectable - Solid State Switch: 10 V DC 0.01 A max |
LED indicator | Disable: During Normal operation Enable: During Wlk Test or LED SW on Red: Warm-up Alarm Trouble Low Battery |
RF interference | No alarm 10 V/m |
Operating Temperature | -4 - 140°F (-20 - 60°C) |
Environmental humidity | 95% max |
Weatherproof | IP 55 |
Mounting | Wall |
Mounting Height | 82" - 910" (2.5 -3.0 m) |
Bracket adjust angle | Vertical: /-20° Horizontal: /-95° |
Weight | 27.5 oz (780g) |
Accessories | Bracket Screw (4 x 20 mm) x 4 Velcro tape x 2 Alarm cable Battery lead x 2 Dummy battery kit |
2024-02-23 11:55:27
Page: 6
Reviews
No customer reviews for the moment.