TA-1 WINLAND ELECTRONICS Analog Temperature Sensor Alarm Activates with High and/or Low temperatures

The TempºAlert® has been designed for reliable monitoring of non-condensing (indoor only) environment areas where high and low temperature limits are critical.

Select an acceptable temperature range by setting the adjustable high and low limit arms. If the monitored are temperature either rises or falls to the limit arms the temperature indicator will contact one of the limit arms. This completes the circuit and provides you with a dry contact alarm signal. The TA-1 contacts are normally open (N.O.) dry contacts rated at 50mA at 12 Vdc. This output can be used to activate alarm systems telephone dialers or other remote warning devices. TempºAlert® is the ideal addition for any security system.

Electrical and Physical Specifications:
   • No power required to operate
   • Operating temperature:
    —Alarm Use: 50 to 130º F (10 to 54º C) non-condensing environments only  Alarm contacts may not function outside of this range
      —Display Use: -30 to 130º F (-34 to 54º C) non-condensing environments only
   • Low limit adjust range: -30 to 120º F (-34 to 49º C)
   • High limit adjust range: -20 to 130º F (-29 to 54º C)
   • Temperature accuracy: -/ 3º F (-/ 1.7º C)
   • Temperature response time: TC=14 minutes
   • Temperature sensing element: Bimetallic coil
   • Outputs: Gold plated N.O. dry contacts (Not for high voltage use)
   • Contact output rating: 50mA 12 Vdc
   • Weight: 6.5 oz.
   • Dimensions: 6.25 x 3.75 x 2”
   • Material: ABS
   • Mounting: Key slot

This package contains:
   • One TA-1
   • 2 mounting screws and 2 wall anchors 
   • Mounting template
   • Installation/Operating instructions Guide

2024-02-23 11:55:27

Page: 6