PLANET XGS3-24242 Switch Core 3 24-Port 10/100/1000 Mbps with 12-Port SFP 1000 Mbps Shared 4 Expansion Slots 10G

Physical Port
• 24-port 100/1000BASE-X mini-GBIC/SFP slots
• 16 10/100/1000BASE-T RJ45 copper ports shared with port-1 to port-16
• 4 10GBASE-SR/LR SFP slots compatible with 1000BASE-SX/LX/BX SFP
• 2 20Gbps Hardware Stacking ports
• RJ45 to DB9 console interface for switch basic management and setup
• 1 RJ45 Ethernet management port for switch basic management and setup
• 1 USB 2.0 for backup/upload configuration and firmware upgrade

IP Stacking
• Connects with stack member via both Gigabit TP/SFP interface and 10G SFP slots
• Single IP address management supporting up to 24 units stacked together

Hardware Stacking
• Connects with stack member via QSFP slots
• Supporting up to 6 units stacked together

IP Routing Features
• IP routing protocol supports RIPv1/v2 RIPng OSPFv2/v3 BGP4/4
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution

Multicast Routing Features
• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol • Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source • Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2

Layer 2 Features
• Complies with the IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z Gigabit Ethernet and IEEE 802.3ae 10Gb/s Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
    - IEEE 802.3x pause frame flow control in full-duplex mode
    - Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture broadcast storm control port loopback detect
• 32K MAC address table automatic source address learning and aging
• Supports VLAN
    - IEEE 802.1Q tag-based VLAN
   - GVRP for dynamic VLAN management
   - Up to 256 VLANs groups out of 4041 VLAN IDs
   - Provider Bridging (VLAN Q-in-Q IEEE 802.1ad) supported
   - Private VLAN Edge (PVE) supported
   - GVRP protocol for Management VLAN
   - Protocol-based VLAN
   - MAC-based VLAN
   - IP subnet VLAN
• Supports Link Aggregation
   - Maximum 128 trunk groups with up to 8 ports per trunk group
   - IEEE 802.3ad LACP (Link Aggregation Control Protocol)
   - Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
   - IEEE 802.1D Classic Spanning Tree Protocol (STP)
   - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
   - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) spanning tree by VLAN
   - BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)

Quality of Service
• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
   - IEEE 802.1p CoS/ToS
   - IPv4/IPv6 DSCP
  - Port-based WRR
• Strict priority and WRR CoS policies

Multicast
• Supports IPv4 IGMP snooping v1 v2 and v3 and IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)

Security
• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• Supports URPF to avoid IP address clone
• IPv6 ND snooping

Management
• Management IP for IPv4 and IPv6
• Switch Management Interface
    - Console/Telnet Command Line Interface
    - Web switch management
    - SNMP v1 v2c and v3 switch management
     - SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• DHCP relay and option 82
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Four RMON groups 1 2 3 9 (history statistics alarms and events)
• Supports ping trace route function for IPv4 and IPv6
• User Privilege levels control
• Link Layer Discovery Protocol (LLDP) and LLDP-MED

Redundant Power System
• 100240V AC -40V-60V DC (optional) dual redundant power

Physical and Electrical Characteristics:
• Redundant power supply: 100-240VCA / 79W and 48VDC
• Dimensions: 1U Rack 415 x 325 x 44.5 mm.
• Weight: 4.3 Kg.
• Operating temperature: 32 to 122 ºF (0 to 50°C)

2 Year warranty.

2024-10-22 13:25:42

Page: 4

XGS324242 PLANET Switch Core 3 24-Port 10/100/1000 Mbps with 12-Port SFP 1000 Mbps Shared 4 Expansion Slots 10G XGS3-24242