- New
- Out Of Stock - info sales@secupply.com

WIRELESS INTERFACE
802.11a/n (2x2) Radio
Operating Mode: AP/ CPE/ Bridge/ Repeater
Standard: IEEE 802.11a/n
Operating Frequency: 5.15 – 5.35 GHz
5.47 – 5.725 GHz
5.725 – 5.825 GHz
Transmit Power: 29 dBm (Max.)
26 dBm (Per Chain)
Receiver Sensitivity
802.11a 54 Mbps -83 dBm
6 Mbps -96 dBm
802.11n HT20 -95 dBm
HT40 -91 dBm
16 SSID (Max.)
WDS
Altai AirFi™ Throughput Optimization
Automatic Channel Selection (with Scheduling)
WMM
Preferred AP Association
ANTENNA (OPTIONAL ACCESSORIES)
External Antenna 20 dBi Panel
16 dBi 100º(-6dB) Sector
9 dBi Omni
Antenna Connector 2 x RP-SMA Female
NETWORKING
VLAN
IPv4/ IPv6 Dual-stack
Switch (Bridge) and Gateway Mode
DHCP Client/ Server/ Relay
NAT
PPPoE Client/ PPPoE Pass-through
VPN Pass-through
Bandwidth Control Per VAP/ Client
Multicast Rate Filter/ IGMP Snooping
Port Forwarding
SECURITY
Authentication – Open system Shared key WPA/ WPA-PSK WPA2/ WPA2-PSK 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)
Encryption – WEP TKIP AES
RADIUS Client (PAP CHAP)
RADIUS Accounting Inter/ Intra-client Isolation
MAC-based Access Control (White/ Black List)
SSID Suppression WAPI
MANAGEMENT
Standalone (Managed by AWMS)
Thin AP/ CAPWAP Protocol (Managed by Access Controller)
Web User Interface
Command Line Interface (SSH)
3-level User Login
Remote Firmware Upgrade (HTTP TFTP)
SNMP v1/ v2c
MIB2/ IF-MIB/ Altai Enterprise MIB
Performance Statistics/ Alarm Information Display
WiFi Client Association/ Disassociation Statistics
Syslog
PHYSICAL SPECIFICATIONS
Dimensions: 11 x 3.14 x 1 in (280 x 80 x 27 mm)
(excluding mounting)
Weight 0.4 kg
Mounting Desktop Pole Wall or Window-mounted
Network Interface 10/100 Mbps Ethernet Port
LED Display: Main Power Status
Ethernet Status
8-level Signal Strength
(User configurable)
POWER SUPPLY
Power Source PoE Injector (18V)
Power Consumption 6 W (Typical) / 8 W (Max.)
ENVIROMENTAL SPECIFICATIONS
Operating Temperature: -20 °C to 55 °C
Storage Temperature: -40 °C to 80 °C
Humidity: 5 – 95% (Non-condensing)
Wind Loading: Up to 200 km/h (124 mph)
Weatherproof Outdoor: UV Stabilized Plastic
IP55 Compliant
The coverage range will be varied depending on NLOS and interference conditions. The transmit power may be varied according to country regulation. Although Altai has attempted to provide accurate information in these materials Altai assumes no legal liability for the accuracy and completeness of the information. All specifications are subject to change without notice.
HIGHLIGHTS
Designed as an essential component in the Altai Super WiFi system to extend outdoor WiFi coverage into indoor areas for broadband connectivity in 5 GHz band or use as an AP for pico coverage.
Complementing Altai’s super WiFi base station coverage solution is the C1xn/C1xan high-performance CPEs which employ a patented smart-signal processing algorithm and an antenna designed to increase WiFi signal strength.
2023-11-29 15:55:31
Page: 7
No customer reviews for the moment.