EPMP-2KL(US) CAMBIUM NETWORKS C058900L132A - ePMP 2000: 5 GHz AP Lite with Intelligent Filtering and Sync (FCC)

Spectrum:
• Channel spacing: Configurable on 5 MHz increments
• Frequency range: 5150 5970 MHz (exact frequencies as allowed by local regulations)
• Channel width: 5 10 20 40 MHz

Interface:
• Physical layer: MIMO 2x2 / OFDM
• Ethernet interface: 100/1000BaseT rate auto negotiated 802.3at compliant
• Powering methods: Supported 56 V PoE (included) standard 802.3at PoE Supply or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
• Protocols used: IPv4 UDP TCP IP ICMP SNMPv2c HTTPs STP SSH IGMP Snooping
• Network management: HTTPs SNMPv2c SSH
• VLAN: 802.1Q with 802.1p priority

Performance:
• Subscribers per sector: Version limited to 10 sm
• ARQ: Yes
• Nominal Receive Sensitivity (w/FEC) 20 MHz Channel
    -MCS0 = -93 dBm to MCS15 = -69 dBm (per branch)
• Nominal Receive Sensitivity (w/FEC) 40 MHz Channel
    -MCS0 = -90 dBm to MCS15 = -66 dBm (per branch)
• Modulation Levels (Adaptive)
    -MCS0 (BPSK) to MCS15 (64QAM 5/6)
• GPS synchronization: Yes via Internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
• Quality of Service: Three level priority (Voice High Low) with packet classification by DSCP COS VLAN ID IP & MAC Address Broadcast Multicast and Station Priority

Physical and Electrical Features:
• Sector antenna connection: 2 x 50 ohm RP (Reverse Polarity) SMA
• Beamforming antenna connection: 2 x 50 ohm RP (Reverse Polarity) SMA DC Coupled (powering antenna)
• GPS antenna connection: 1 x 50 ohm RP (Reverse Polarity) SMA
• Surge Suppression: 1 Joule integrated
• Environmental: IP55
• Operating temperature: -22 to 131ºF
• Power consumption: 20 W Maximum 1
• Input Voltage: 44 V to 59 V
• Dimensions: 8.74 x 4.88 x 1.77” (without brackets)
• Weight: 1.54 lb (without brackets)

1 Year Warranty

2024-02-23 11:55:24

Page: 5