CAMBIUM NETWORKS FORCE200 ePMP Force 200-25 for Wireless Links in High-Interference Areas Low Latency 25 dBi Antenna 4910-5970 MHz

ePMP Force 200 5 GHz

Designed to operate in high interference environments

The ePMP Force 200 5 GHz adds a subscriber module and point-to-point (PTP) radio to ePMP’s 5 GHz line of products and provides superior throughput of over 200 Mbps of real user data. Long range deployment is enabled by the 25 dBi antenna. Configurable Modes of operation ensure robust adaptivity to both symmetrical and asymmetrical traffic while providing high performance and round-trip latency as low as 2 – 3 ms.

SPECTRUM

• Channel Spacing: Configurable on 5 MHz increments
• Frequency Range: 5 GHz Model: 4910 - 5970 MHz
• Channel Width: 5 10 20 40 MHz

INTERFACE

• MAC (Media Access Control) Layer: Cambium Proprietary
• Proprietary Physical Layer: 2x2 MIMO/OFDM
• Ethernet Interfaced:10/100/1000 BaseT Compatible with Cambium PoE & Standard PoE pinouts
• Protocols Used: IPv4/IPv6 (Dual Stack) UDP TCP ICMP SNMPv2c NTP STP IGMP SSH
• Network Management: IPv4/IPv6 HTTPs SNMPv2c SSH Cambium Networks CnMaestro™
• VLAN: 802.1Q with 802.1p priority

PERFORMANCE

• ARQ:Yes
• Nominal Receive Sensitivity (w/FEC) 20 MHz Channel:MCS0 = -92 dBm to MCS15 = -68 dBm (per branch)
• Nominal Receive Sensitivity (w/FEC) 40 MHz Channel:MCS0 = -89 dBm to MCS15 = -65 dBm (per branch)
• Modulation Levels (Adaptive):MCS0 (BPSK) to MCS15 (64QAM 5/6)
• Quality of Service:Three level priority (Voice High Low) with packet classification by DSCP COS VLAN ID IP & MAC Address Broadcast Multicast and Station Priority
• Transmit Power Range: -15 to 30 dBm (combined to regional EIRP limit) (1 dB interval)

PHYSICAL

• Surge Suppression: 1 Joule Integrated
• Environmental: IP55
• Temperature: -30°C to 60°C (-22°F to 140°F) – with radome attached maximum temperature is 47°C (116°F)
• Weight: 5 GHz Model: 2.3 kg (5.1 lbs)
• Wind Survival: 145 km/hour (90 mi/hour)
• Dimensions (Dia x Depth): 47 cm x 28 cm (18.5 in x 11.2 in)
• Pole Diameter Range: 6.4 cm - 7.6 cm (2.5 in - 3 in)
• Power Consumption: 10 W Maximum 5 W Typical
• Input Voltage: 10 to 30 V

SECURITY

• Encryption:128-bit AES (CCMP mode)

CERTIFICATIONS

• FCCID: 5 GHz: Z8H89FT0015
• Industry Canada Cert: 5 GHz: 109W-0015
• CE: 5.4 GHz EN 301 893 V2.1.1 5.8 GHz EN 302 502 V2.1.1

Force 200 5 GHz

5
GHz200
Mbps25
dBi
Spectrum
• Channel spacing: Configurable on 5 MHz increments
• Frequency range: 4910 - 5970 MHz
• Channel width: 5/ 10/ 20/ 40 MHz

Interface
• MAC (Media Access Control) Layer: Cambium Proprietary
• Physical layer: 2x2 MIMO/OFDM
• Ethernet interface: 10/100/1000BaseT compatible with Cambium PoE & Standard PoE inputs
• Protocols used: IPv4 UDP TCP IP ICMP SNMPv2c HTTPs STP SSH IGMP Snooping
• Network management: HTTPs SNMPv2c SSH
• VLAN: 802.1Q with 802.1p priority

Security
• Encryption128-bit AES (CCMP mode)
• Certifications
-FCCID Z8H80FT0019
-Industry Canada Cert 109W-0019
-CE N/A

5 GHz Antenna Specifications
• Frequency range: 5 GHz
• Antenna type: Dish
• Peak gain: 25 dBi
• 3 dB Beamwidth - Azimuth: 7º
• 3 dB Beamwidth - Elevation: 7º
• Front-to-back Isolation >20 dB
• Cross polarization > 15 dB

Physical
• Surge suppression: 1 J Integrated
• Environmental: IP55
• Windsurvival: 90 mph  (145 km/h)
• Input voltage: 10 to 30 V
• Power consumption: 10 W Maximum 5 W Typical
• Pole diameter range: 2.5 - 3”  (6.4 - 7.6 cm)
• Operating temperature: -22 to 140 ºF  (-30 60 ºC) — with radome attached maximum temperature is 47 ºC  (116.6 ºF)
• Dimensions: 18.5 x 11.2”  (47 x 28 cm)



 

2024-10-22 13:25:40

Page: 4

FORCE200 CAMBIUM NETWORKS ePMP Force 200-25 for Wireless Links in High-Interference Areas Low Latency 25 dBi Antenna 4910-5970 MHz FORCE200