PMP-450S4C3G(US) CAMBIUM NETWORKS 3.3-3.6 GHz PMP 450 Connectorized Subscriber Module 4 Mbps - C035045C005A

Now available in most popular global bands 2.4 3.5 3.65 and 5 GHz the PMP 450 Subscriber Module (SM) supports tiered service models. Software defined upgrades allow throughput from 4 Mbps to over 100 Mbps to improve revenue optimization.

• FREQUENCY RANGE: 3300 – 3600 MHz
• CHANNEL WIDTH: 5 MHz 7 MHz 10 MHz 15 MHz 20 MHz 30 MHz or 40 MHz
• CHANNEL SPACING: Configurable to 50 KHz

Features:
• Frequency range: 5470 - 5875 MHz
• Channel width: 5 MHz 10 MHz 20 MHz or 30 MHz
• Channel spacing: Selectable on 2.5 MHz increments
• MAC (Media Access Control) layer: Cambium Networks proprietary
• Physical layer: 2x2 MIMO OFDM
• Ethernet interface: 10/100/BaseT half/full duplex rate auto negotiated (802.3 compliant)
• Protocols: IPv4 UDP TCP IP ICMP Telnet SNMP SNMP HTTP FTP
• Network management: HTTP HTTPS Telnet FTP SNMP v3
• VLAN: 802.1ad (DVLAN Q-inQ) 802.1Q with 802.1p priority dynamic port VID
Modulation modes (Dynamic): Dual payload (higher throughput) MIMO-8 or Single Payload (polarity diversity) MIMO-A
• Maximum deployment range: Up to 40 miles
• Latency: 3 - 5 ms typical
• Antenna beam width: 55º Azimuth 55º Elevation (both polarizations)
• Antenna gain: 
    -9 dBi HV Integrated Patch (5 GHz)
    -8 dBi Dual Slant Integrated Patch (2.4 GHz 3 GHz)
• Antenna connection: Integrated patch antenna connectorized versions available
• Environmental: IP55
• Typical power consumption: 9 W (5 GHz and 2.4 GHz) 12 W (3 GHz)
• Max. power consumption: 12 W (5 GHz and 2.4 GHz) 15 W (3 GHz)
• Input voltage: 20 to 32 V
• Temperature: -40 to 140 ºF 0 - 95% non-condesnsing
• Dimensions: 11.75 x 3.4 x 3.4”
• Weight: 1lb

2024-02-23 11:55:24

Page: 5