SEST-30G SYSCOM TOWERS Tower Stabilizer for Sections STZ-30G Hot-dip Galvanized

A stabilizer or anti-twist arm as is also known is an element designed to hold the tower at a certain height to prevent movement due to strong wind currents

Unlike a flange (which is held at one point on each side of the tower) a stabilizer is held at 2 points per side i.e. at the same height it will be held at 6 points which prevents excessive twisting in the tower and a better structure rigidness.

When do you install a stabilizer

A stabilizer is not a required piece when assembling a tower. Generally a stabilizer is installed when:

- It has a large trailing surface antenna (equal or greater than 1 m of diameter).

- When there are strong winds due to terrain conditions.

- In high precision wireless links

It is recommended to replace the installation of a flange when adding a stabilizer since we remember that the more cables we put to the tower the heavier it will be and the more cargo we will be delivering to the ground.

Physical Characteristics:

Material: hot-dip galvanized steel.

Compatible with section STZ30. 

Face width: 60 cm.

Weight: 12.1 Kg.

Includes:

3   - Subjection brackets with nuts.

3   - Corners

3   - Channels

24 - Arming screws with safety nuts.

Product Manufactured Under ISO 9000 Norms

Installation Image

2024-01-22 09:55:41

Page: 8