STZ-60G SYSCOM TOWERS 10 ft x 23.6 in Width Guyed Tower Section Hot-dip Galvanized Maximum Height 30 ft

Product Manufactured under ISO 9000 Standards

• Its light structure allows the lifting of telecommunications equipment at a very low cost.

• The product receives a 100% dimensional revision this means that each one of our tower sections is pre-ensemble to ensure the compatibility with its bolt coupling nipple etc.

• It has a hot-dip galvanized treatment. Ensures excellent protection in humid (coastal) environments or in environments with moderate corrosion.

• No need to worry about compatibility. A model of tower section bough with us a year ago will be fully compatible with the same model purchase today facilitating tower installation (talk with an expert when using tower sections of different years).

Physical Characteristics:

• Maximum load: 1764 lbs (800 kg).
• Maximum height: 30 ft / 100 m.
• Wind resistance: 125 mph (200 Km/h).
• Material: Industrial Tube 1 1/4" (Gauge 14). Zig zag diameter: 1/2".
• Coupling: 6.3 in (16 cm).
• Face width: 2 feet (60 cm).
• Weight: 105.27 lbs (47.75 Kg).
• Dimensions: 10 ft Length.
• Anti-corrosive protection: Hot-dip galvanized.
• Application: Outdoor (humid zones).
• Includes screws for installation: 6 screws 1/2" x 3 1/2" with nut stainless steel.


Recommendations:

• Make sure the installation is performed by a professional.
• Schedule a maintenance plan to inspect retained tension and adjustment of screws.
• Do not install solar panels higher than 20 feet. Check for compatibility between solar panels and tower sections.
• A study of forces should be made when an excessive load is placed on the tower. Or this could cause excessive torsion or flexion in the tower causing structural flaws.

The declared weight is only for the product it does not take into consideration accessories or packaging.



Recommendation for height and subjection. 


Cable Guide Installation for Tower.


FOR QUESTIONS OR COMMENTS CONTACT THE ENGINEERING DEPT.

2024-02-23 11:55:10

Page: 2