SYSCOM TOWERS STZ-60G-DES Tower Section for Areas with Strong Winds 2 ft Face Width Hot-dip Galvanized (Base Section)

Product Manufactured Under ISO 9000 Standards

This tower section must be placed first when assembling a guyed tower of 90 cm wide. 
This component doesnt include nipple or coupling and allows a correct installation.

• Its lightweight structure enables your desired product to be raised up to 30 ft high.

• The product gets a dimensional revision. This means that each one of our tower sections is pre ensemble to ensure the compatibility with its bolt coupling nipples etc.

• Our product is hot-dip galvanized to ensure excellent protection in humid regions coastal regions or moderate corrosion environments.

• You don’t have to worry about compatibility problems. A model of the tower section bought with us a year ago will be perfectly compatible with the same model bought today facilitating the union of sections (consult with an installation expert for older pieces)


Physical Characteristics:

•  Maximum load: 17674 lbs (800 Kg).
• Maximum height: 30 ft
• Wind resistance: 125 mph (200 Km/hr).
• Material: Industrial tube 1.66" (AWG 30). zig-zag: 1/2".
• Nipple: 15.75 in (40 cm).
• Side width: 2 ft (60 cm).
• Weight: 105.27 lbs (47.75 Kg).
• Dimensions: 10 feet long.
• Anti-corrosive protection: Hot-dip galvanized.
• Application: Exterior (humid areas).

Recommendations:

• Ensure that the installation is performed by a trained professional consult with a professional when mounting equipment in the tower.
• Set up a maintenance plan for review of tensions retained and adjusting screws.
• Dont install solar panels over 19 ft. Check for compatibility between solar panels and mountings.
• The tower must be painted in orange-red and white in 7 stripes of equal height starting and ending in orange-red (SYSCOM does not do the painting work of the tower).

The declared weight is only for the product it does not take into consideration accessories or packaging.



Recommendation for height and subjection.

Cable Guide Installation for Tower.

FOR QUESTIONS OR COMMENTS CONTACT THE ENGINEERING DEPT.

2024-10-22 13:25:16

Page: 2

STZ60GDES SYSCOM TOWERS Tower Section for Areas with Strong Winds 2 ft Face Width Hot-dip Galvanized (Base Section) STZ-60G-DES