- New
- Out Of Stock - info [email protected]
ULD-TP-400-4PACK
ULDTP4004PACK RF ELEMENTS 4 Pack - Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount ULD-TP-400-4PACK
ULD-TP-400-4PACK RF ELEMENTS 4 Pack - Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount
Antenna Connection TwistPort - Quick Locking Waveguide Port
Antenna Type Parabolic Dish
Gain 24.5 dBi
Enviromental IP65
Pole Mounting Diameter 22-80 mm
Temperature- 40 to 60 °C (-40°F to 140°F)
Wind Survival 160 Km/h
Antenna Compatibility
Any TwistPortTM Adaptor with TwistPortTM connector
Any SIMPERTM Radio with TwistPortTM connector
High Gain Directional Antennas
UltraDishTM TP Antennas are high-gain directional parabolic antennas with a lossless TwistPortTM connector. The antennas are highly directional and have suppressed side lobes for ultimate performance.
Beam Performance
UltraDishTM TP antennas have suppressed side lobe radiation that reduces interference and enables installation in areas with high noise levels. The gain of UltraDishTM TP Antennas is achieved by focusing the signal delivered via the TwistPortTM waveguide.
Wideband 5.1 - 5.9 GHz
Starting with version "V2" you can utilize all benefits of TwistPortTM eco-system and superb performance of TP antennas in wideband. TwistPortTM Adaptors V2 cover ultra-wideband spectrum: 5180-6400 MHz
TwistPortTM Connector
TwistPortTM connector is a quick-locking virtually lossless waveguide port that connects the radio with the antenna. The TwistPortTM connector is our design and sets a new standard for outdoor wireless equipment in terms of performance scalability ease of use and deployment simplicity.
Easy Connection
TwistPortTM is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure the connection of the radio to the antenna is brilliantly simple - “twist and lock” - and can be done with one hand
Lossless
TwistPortTM connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause significant signal loss. In comparison to widely used coaxial cables and connectors the loss on TwistPortTM is almost unmeasurable.
Cross-Platform Compatibility
UltraDishTM TP Antennas can be used with any radio with a TwistPortTM interface or with a variety of third-party radios connected through a TwistPortTM Adaptor.
Innovative Mount
UltraDishTM TP Antennas features a new innovative mounting system. The mount is separated from the antenna which makes the antenna installation and adjustment easy and quick.
Step 1: Bracket Installation
First install the bracket on the pole. Two sets of pole screws for different pole diameters are included.
The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.
The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.
Step 2: Antenna Adjustment
Simply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.
Only one tool is needed for the entire installation.
Only one tool is needed for the entire installation.
2024-02-23 11:55:22
Page: 5
Reviews
No customer reviews for the moment.
ULDTP4004PACK RF ELEMENTS 4 Pack - Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount ULD-TP-400-4PACK