ULD-TP-400

0 Review(s) 
ULDTP400 RF ELEMENTS Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount ULD-TP-400
RF ELEMENTS
ULD-TP-400
Sorry, This item is out of stock.

ULD-TP-400 RF ELEMENTS Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount

  RF Elements

 
 

Antenna Connection          TwistPort - Quick Locking Waveguide Port
Antenna Type                      Parabolic Dish
Gain                                      24.5 dBi
Environmental                       IP65
Pole Mounting Diameter     22-80 mm
Temperature-                       40 to 60 °C (-40°F to 140°F)
Wind Survival                      160 Km/h
Antenna Compatibility
          Any TwistPortTM Adaptor with TwistPortTM connector
          Any SIMPERTM Radio with TwistPortTM connector
 

High Gain Directional Antennas

UltraDishTM TP Antennas are high-gain directional parabolic antennas with a lossless TwistPortTM connector. The antennas are highly directional and have suppressed side lobes for ultimate performance.
High Gain Directional Antennas ULD new

Beam Performance

UltraDishTM TP antennas have suppressed side lobe radiation that reduces interference and enables installation in areas with high noise levels. The gain of UltraDishTM TP Antennas is achieved by focusing the signal delivered via the TwistPortTM waveguide.
dish prierez new

Wideband 5.1 - 5.9 GHz

Starting with version "V2" you can utilize all benefits of TwistPortTM eco-system and superb performance of TP antennas in wideband. TwistPortTM Adaptors V2 cover ultra-wideband spectrum: 5180-6400 MHz 
Wideband red new

TwistPortTM Connector

TwistPortTM connector is a quick-locking virtually lossless waveguide port that connects the radio with the antenna. The TwistPortTM connector is our design and sets a new standard for outdoor wireless equipment in terms of performance scalability ease of use and deployment simplicity.
TwistPort Connector new

Easy Connection

TwistPortTM is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure the connection of the radio to the antenna is brilliantly simple  - “twist and lock” - and can be done with one hand
 
 
 
 
 
 

Lossless

TwistPortTM connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause significant signal loss. In comparison to widely used coaxial cables and connectors the loss on TwistPortTM is almost unmeasurable.
 
 
 
 
 
 

Cross-Platform Compatibility

UltraDishTM TP Antennas can be used with any radio with a TwistPortTM interface or with a variety of third-party radios connected through a TwistPortTM Adaptor.
Cross Platform Compatibility new

Innovative Mount

UltraDishTM TP Antennas features a new innovative mounting system. The mount is separated from the antenna which makes the antenna installation and adjustment easy and quick.
DISH ruka new

Step 1: Bracket Installation

First install the bracket on the pole. Two sets of pole screws for different pole diameters are included. 
The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.
 
 
 
 
 
 

Step 2: Antenna Adjustment

Simply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.
Only one tool is needed for the entire installation.
 
 
 
 
 
 
 

2024-02-23 11:55:23

Page: 5

RF ELEMENTS
ULD-TP-400

Reviews

No customer reviews for the moment.

Write your review

ULD-TP-400

ULDTP400 RF ELEMENTS Parabolic Dish Antenna 24.5 dBi with a TwistPort Connector and an Innovative Mount ULD-TP-400

Write your review