WGSW-24040R PLANET 24-port 10/100/1000 Mbps Manageable L2 Switch 4-port Combo SFP

Cost-effective IPv6 Managed Gigabit Switch Solution for Enterprises
PLANET WGSW-24040 series is a Layer 2 managed Gigabit Switch that features 24-Port 10/100/1000BASE-T 4-Port Shared 100/1000BASE-X SFP and supports static Layer 3 routing for enterprise-level network. The abundant L2/L4 switching engine offered by the WGSW-24040 series performs effective data traffic control for enterprises and VoIP service providers video streaming and multicast applications. Providing user-friendly but advanced IPv6/IPv4 management interfaces it is well suited for backbone and workgroup network applications by providing affordability high performance and stable transmission quality.

 

Physical Port

• 24-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots shared with Port-21 to Port-24 compatible with 100BASE-FX SFP
• Console interface for basic management and setup

Layer 2 Features

• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm control support
• - Broadcast / Multicast / Unknown-unicast

• Supports VLAN
• - IEEE 802.1Q tagged VLAN

• - Up to 255 VLANs groups out of 4094 VLAN IDs

• - Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)

• - Private VLAN Edge (PVE)

• - Protocol-based VLAN

• - MAC-based VLAN

• - Voice VLAN

• - GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
• - IEEE 802.1D Spanning Tree Protocol(STP)

• - IEEE 802.1w Rapid Spanning Tree Protocol(RSTP)

• - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) spanning tree by VLAN

• - BPDU Guard

• Supports Link Aggregation
• - 802.3ad Link Aggregation Control Protocol (LACP)

• - Cisco ether-channel (static trunk)

• - Maximum 10 trunk groups up to 16 ports per trunk group

• - Up to 32Gbps bandwidth (full duplex mode)
• Provides port mirroring (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices.

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
• - IEEE 802.1p CoS

• - TOS / DSCP / IP Precedence of IPv4/IPv6 packets

• - IP TCP/UDP port number

• - Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IGMP snooping v1 v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Multicast VLAN Registration (MVR) support

Security

• Authentication
• - IEEE 802.1x port-based / MAC-based network access authentication

• - Built-in RADIUS client to co-operate with the RADIUS servers

• - TACACS login users access authentication

• - RADIUS / TACACS users access authentication
• Access Control List
• - IP-based Access Control List (ACL)

• - MAC-based Access Control List
• Source MAC / IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• - Console / Telnet command line Interface

• - Web switch management

• - SNMP v1 v2c and v3 switch management

• - SSH / SSL secure access

• IPv6 IP Address / NTP / DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• - Firmware upload/download via HTTP / TFTP

• - Reset button for system reboot or reset to factory default

• - Dual Images
• DHCP Relay
• DHCP Option82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
• - ICMPv6 / ICMPv4 Remote Ping

• - Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP / Syslog remote alarm
• Four RMON groups (history statistics alarms and events)
• SNMP trap for interface Link Up and Link Down notification
• System Log
• PLANET Smart Discovery Utility for deploy management

Redundant Power System (WGSW-24040R)

• Redundant 100240V AC/36-60V DC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience

2024-02-23 11:55:22

Page: 5