- New
- Out Of Stock - info [email protected]
304-412
304412 WilsonPRO / weBoost Wilson Electronics 4G Dome Ceiling Antenna 50 Ohm 698-960/1710-2700 MHz N-Female Connector 304-412
304-412 WilsonPRO / weBoost Wilson Electronics 4G Dome Ceiling Antenna 50 Ohm 698-960/1710-2700 MHz N-Female Connector
Wilson Electronics 4G Dome Ceiling Antenna 50 Ohm.
PRODUCT HIGHLIGHTS
- Indoor 4G ceiling-mount antenna
- Works with 50 Ohm amplifiers and accessories
- Fixed installations
- Built-in ground plane
- Up to 5.1 dB Gain
PRODUCT SPECIFICATIONS
Installation Instructions
Ensure that you purchase the correct impedance antenna for your amplifier system. 50-ohm antennas (with N connectors) go with 50 ohm systems and 75-ohm antennas (with F connectors) go with 75 ohm systems. Panel antenna installation is easy. Just choose your preferred mounting style. Attach the mount in the optimal place on the wall ceiling or pole. Attach the antenna to the fixed mount. And connect the installed antenna to the amplifier using a separate N-Male (50 ohms) or F-Male (75 ohms) cable. Panel Antennas are directional antennas which will transmit and receive signal mostly from the front. It can be installed both vertically on walls or poles (weather-resistant version) and horizontally on ceilings. Please use the appropriate mount for each specific installation. This is a building antenna so large vehicle installations will require secure installation using appropriate mounts to prevent antenna vibration and shifting inside the mount.
FREQUENCY & GAIN | 700-800 MHz 824-894 MHz 880-960 MHz 1710-1880 MHz 1850-1990 MHz 2110-2170 MHz | 1.0 dB 1.6 dB 1.2 dB 4.9 dB 5.1 dB 4.1 dB |
IMPEDANCE | 50 Ohms | |
MAX POWER | 50 watts | |
BEAMWIDTH HORIZONTAL PLANE | 360 Deg | |
BEAMWIDTH VERTICAL PLANE | 60 Deg | |
BEAMWIDTH HORIZONTAL PLANE | 360 Deg | |
CONNECTORS | N-Female | |
CABLE LENGTH | 300 mm |
Ensure that you purchase the correct impedance antenna for your amplifier system. 50-ohm antennas (with N connectors) go with 50 ohm systems and 75-ohm antennas (with F connectors) go with 75 ohm systems. Panel antenna installation is easy. Just choose your preferred mounting style. Attach the mount in the optimal place on the wall ceiling or pole. Attach the antenna to the fixed mount. And connect the installed antenna to the amplifier using a separate N-Male (50 ohms) or F-Male (75 ohms) cable. Panel Antennas are directional antennas which will transmit and receive signal mostly from the front. It can be installed both vertically on walls or poles (weather-resistant version) and horizontally on ceilings. Please use the appropriate mount for each specific installation. This is a building antenna so large vehicle installations will require secure installation using appropriate mounts to prevent antenna vibration and shifting inside the mount.
2024-02-23 11:55:10
Page: 2
Reviews
No customer reviews for the moment.