9913/1000 BELDEN Belden Cable Duobond II Shield 90% Tinned Copper Braid Insulation: Polyethylene Semi-Solid
Bare copper conductor 10 AWG .108 " semi-solid polyethylene insulation Duobond® II tinned copper braid shielding (90% coverage) PVC cover.
Advantage :
- Coaxial that complies with the RG8 / U standard
- Pure copper conductor and solid type for less attenuation (multi-filar version: 9913F)
- Polyethylene insulation for better propagation speed (84%)
- Double shielding:
- Aluminum sheet attached to the insulation to prevent wrinkles in the connectorization ("bonded duo foil" Belden patent)
- 90% dense mesh to avoid interference noise copper (maximum conductivity) with tin bath (to prevent moisture from entering).
- Low loss (series "low loss" of Belden): at 30 meters only 2.6dB 400Mhz
- High power: 619 Watts 400 Mhz
- High voltage supported 600V RMS
- Minimum capacitance (electrostatic charge): 24.6 picofarads per foot
- Wide temperature range: from -40 to 80
- Supports maximum pulling force: 300 pounds
Features :
- Impedance: 50 Ohms.
- Outside Diameter; .405 in. 10.29mm
- Speed Factor: 84%.
- Attenuation in 30 meters. UHF 450 MHz.2.7 dB.
- Internal conductor AWG gauge: 10 (.108) Solid copper.
- Insulation: Semi-solid polyethylene.
- Shielding: Duobond II 90% tinned copper braided mesh.
Price per reel of 1000 ft.
2024-02-23 11:55:10
Page: 2