AT-130

0 Review(s) 
AT130 ICOM HF Automatic Antenna Tuner Covering 1.6 - 30 MHz Marine Frequencies. AT-130
ICOM
AT-130
Sorry, This item is out of stock.

AT-130 ICOM HF Automatic Antenna Tuner Covering 1.6 - 30 MHz Marine Frequencies.


Matches all bands
The AT-130/E matches all frequencies on the HF marine band. For example the tuner matches a 7 m; 23 feet long-wire antenna across 1.6–30 MHz.

Full automatic tuning
Just push the TUNE switch on the transceiver the AT-130/E immediately tunes for a minimum SWR on any frequency in the HF marine band.

HF operation on any size ship
The AT-130/E allows HF operation where antenna element length is restricted due to space.

Weather resistant
The AT-130/E is housed in a durable completely weather resistant acrylic case with a rubber gasket. The antenna tuner can be conveniently installed both on the deck or in the cabin near the antenna element.

Simple installation
Installation is simple. Just connect the control and antenna cables and short-times internal settings. After installation you never need to open the cover for maintenance.

Preset tuning function
This function provides super fast tuning on your mostused frequency. 45 memories for shorter tuning time To decrease the tune-up time the AT-130/E automatically stores the matching conditions for up to 45 frequencies. Retuning for a memorized frequency takes only approximately 1 second.

Super capacitor for memory backup
Even if the AT-130/E is not used for approximately 1 week the built-in super capacitor backs up the 45 memory contents. Low power tune up The AT-130/E emits low output power during tuning. This feature reduces the possibility of causing interference to other stations.

Emergency tuner circuit (AT-130E)
To meet with European regulations the Europe version AT-130E includes an emergency tuner circuit for 2182 kHz operation. If any signal from the control cable indicates an abnormal condition this circuit is automatically selected.  

• Frequency coverage: 1.6–30 MHz (with 7 m; 23.0 ft or longer antenna element)

• Power supply requirement: 13.6 V DC (supplied from the HF transceiver)

• Current drain: Maximum 2 A

• Operating temperature range: –30°C to 60°C; –22F to 140F

• Weight (approximately): AT-130 2.5 kg; 5.5 lb AT-130E 2.7 kg; 6.0 lb

• Antenna connector: SO-239 (50 Ω)

• Maximum Input power: 150 W (PEP) 100 W (continuous)


 

2024-02-23 11:55:11

Page: 2

ICOM
AT-130

Reviews

No customer reviews for the moment.

Write your review

AT-130

AT130 ICOM HF Automatic Antenna Tuner Covering 1.6 - 30 MHz Marine Frequencies. AT-130

Write your review