OPTOELECTRONICS DIGITALSCOUT Digital and Analog Scout Frequency Recorder

The Digital Scout RF frequency recorder / field strength meter is the only instrument capable of counting pulsed RF (digital signals) as well as conventional CW (analog signals) from 10MHz - 2.6GHz.

 

Features

 

-10MHz - 2.6GHz frequency range
-4 hour battery operation
-2x16 alphanumeric LCD with EL backlight
-Signal Strength reading displayed in dBm and bargraph -45dBm to -5dBm
/- 5dBm signal strength accuracy
-Memory download and real time datalogging using built-in RS232 interface (CBDS interface cable and OptoSuite Pro software sold separately)
-Reaction Tune analog signals with ICOM IC PCR1000 R10 R20 R7000 R7100 R8500 and R9000. AOR AR8000 and AR8200. Optoelectronics Optocom OS456/Lite OS535 and R11.
1000 memories with 65 000 hits per memory
-Captures both Digital (Minimum 300uS RF pulse required) and Analog signals
-Beeper and Vibrator alert

 

   Technical Specifications 

 
Frequency Range                       10MHz-2.6GHz
Input Impedance                        50 Ohm
Resolution                                 1kHz and 100Hz
Max Input                                  15dBm (50mW)
Signal Strength                          -45dBm to -5dBm
Signal Accuracy                         Relative signal strength /- 5ppm
Digital Modulations                     GSM TDMA TETRA APCO 25 FHSS
Frequency Time Base                10MHz /- 1ppm initial accuracy
Display                                      2x16 alphanumeric LCD with EL backlight
Size                                          3.7"H x 3"W x 1.75" D
Power Requirements                  9-12VDC 300-1000mA center
Battery                                      Internal rechargeable 5 cell NiCd
Battery run time                         4-5 hours on full charge

2024-10-22 13:25:16

Page: 2

DIGITALSCOUT OPTOELECTRONICS Digital and Analog Scout Frequency Recorder DIGITALSCOUT