- New
- Out Of Stock - info [email protected]
![HD9-406-30](https://cdn-kzkuszewn2kp.vultrcdn.com/4254-large_default/hd9-406-30.jpg)
Heavy duty version for difficult environments remote locations and tower installations. This model has a wind survival of at least 150 mph. The white extruded fiberglass radome is 2-3/8” diameter and is combined with a 24” long 3/16” aluminum base.
Electrical Our Off-Set Radiator (O.S.R) design features phased ½” wave copper radiators which yield precise radiation angles control and very wide bandwidth. All O.S.R materials are made of copper or brass to minimize the possibility of intermodulation. Heavy duty radiating elements and feed system allows for maximum power output. HS 400 watts HD 600 watts HX 600 watts
Radiators/Feed lines are constructed from copper alloy and are welded or soldered which reduces intermodulation. This is encased in a white extruded fiberglass radome with heavy wall aluminum base
Lightning protection is provided by a lightning spike at the top of the antenna which is connected to a 0.200” diameter copper tube. This tube runs the entire length of the antenna for grounding to your support structure.
Weatherproofing is achieved with the use of a sealed type N female connector. Removable drain plugs and O-rings allow proper drainage whether in the upright or inverted position.
Mounting Galvanized steel mounting clamps are provided with each Spirit antenna. The rigid design prevents ratcheting or twisting of the antenna in high winds. The clamp accepts mounting pipes from 1-1/2” to 3-1/7” in diameter or angle members up to 2-1/2”.
Accessories SMK kits (Tower Side Mount Kit) allow mounting of antennas to triangular tower faces. Compatible with tower legs up to 3-1/4” (round) or angle members up to 2-1/2”. 298.20 RTA kits (Reflector Tube) adds 3 dB directional gain to any Spirit series antenna
2024-02-23 11:55:17
Page: 4
No customer reviews for the moment.