PA3-1FE-RXRF TPL COMMUNICATIONS Continuous Duty Cycle Power Amplifier Input 10-50 W Output 40-125 W VHF 150-160 MHz 18 A includes fan

Continuous Duty Cycle Power Amplifier Input 10-50W/Output 40-125W 150-160 MHz 18 A 

• Power Input Standard TPL amplifier input levels optional 10mW or less.
•  Power Output: 40 to 125 watts.
•  Frequencies: VHF Low Band VHF High Band UHF 806-960 MHz
• Voltage 13.8 VDC 120 or 240 VAC (24 VDC or 48 VDC available).
•  Current Model dependent.
•  Harmonic Attenuation Exceeds FCC and IC specifications.
•  RF Connectors Type N 50 Ohms.
•  Operating Temperature -30 to 50 degrees C.
•  Duty Cycle Continuous (100%).
•  Weight 7 lbs. 14 lbs. w/power supply.
•  Dimensions (WHD): 19” x 7” x 3” (w/o fan); 19” x 7” x 5” (with fan); 8” D w/power supply.

FEATURES

•  Accommodates all bands from 150 MHz to 160 MHz.
•  100% duty cycle operation.
•  Repeater or base station operation (with solid state bypass relay option).
•  19” rack mountable configuration.
•  Available with or without self-contained switching power supply.
•  Front panel circuit breaker/on-off switch.
•  Flat front panel allows for cabinet door closure.
•  Optional provision for battery backup.
•  Cost effective design

DESCRIPTION

• The PA3- 1FE-RXRF amplifier is our most popular cost effective continuous duty power amplifier.
• This package will accept any TPL amplifier from VHF Low Band from 150 through 160 MHz with output levels from 40 W up to 125 W.
• All configurations use 7” of vertical rack space and are designed with a flat front panel allowing for installation into a cabinet leaving sufficient room for airflow with the door closed.
• Thise amplifier have a circuit breaker/ on-off switch conveniently located on the front panel and can be supplied with or without a switching power supply.
• The PA3- 1FE-RXRF amplifier is the most versatile unit of its type on the market today.

2024-02-23 11:55:13

Page: 3