- New
- Out Of Stock - info [email protected]
R8100
R8100 FREEDOM COMMUNICATION TECHNOLOGIES Premium Ultra-Portable Choice Communications System Analyzer 250 kHz to 1 GHz.
Premium Ultra-Portable Choice Communications System Analyzer 250 kHz-1 GHz.
The R8100 is a unique device on the market since it has all the characteristics of a communications analyzer in a truly portable package. Easy to handle combine the navigation keys and the segmentation of the screen in “zones” which is common in the FREEDOM Communication Technologies brand.
General Features:
- Spectrum Analyzer
- Signal Generator
- Sensitive Measurement Receiver
- SINAD Meter
- Distortion Meter
- Modulation Scope
- Oscilloscope
- Frequency Error Meter
- Cable Fault Locator (optional)
- FM Deviation Meter
- AM Modulation Meter
- Receive Signal Strength Meter
- Broadband and Narrowband Power Meters
- Audio Counter
- Audio Generator
- AC / DC Voltmeters
- DMR (MOTOTRBO™) test mode (optional)
- NXDN test mode (optional)
- P25 test mode (optional)
- Options Included: Tracking Generator Cable Fault Detector and Enhanced Spectrum Analyzer / Dual Scope.
Accessories Included:
- Telescoping Antenna & Right Angle BNC Adapter
- Microphone
- Oscilloscope Probe
- Power Cord & AC Adapter
- Cable Fault Locator Kit (R8100 only) (3dB splitter 50-ohm load on chain w/bolt & nut and qty 2 12-inch BNC cables)
- Internal Lithium-Ion Battery (R8100 only)
- TNC-to-BNC Adapter (R8100 only)
- 12V to 16V Converter (R8100)
Generator (Receiver test)
- Port Protection Limit: 5W for 30 seconds
- Frequency Range: 250 kHz to 1 GHz
- Extended Frequency
- Range (Optional): 250 kHz to 3 GHz
- Frequency Resolution: 1 Hz
OUTPUT LEVEL GENERATE PORT
- Range FM: 5 to -95 dBm below 2 GHz 5 to -95 dBm above 2 GHz
- Range AM: -1 to -95 dBm below 2 GHz -11 to -95 dBm above 2 GHz
- Resolution: 0.1 dB
- Accuracy: ±2 dB
OUTPUT LEVEL RF I/O PORT
- Range FM: -30 to -130 dBm below 2 GHz -40 to -130 dBm above 2 GHz
- Range AM: -36 to -130 dBm below 2 GHz -46 to -130 dBm above 2 GHz
- Resolution: 0.1 dB
- Accuracy: ±1 dB to 1GHz; ±2dB > 1 GHz
FM MODULATION
- Deviation Accuracy: 5% of setting
- Deviation Range: 0 to 75 kHz
- Deviation Resolution: 10 Hz
- Modulation Bandwidth: 5 Hz to 20 kHz
AM MODULATION
- AM Depth Range: 0 to 90%
- Resolution: 1% of setting
- Modulation Bandwidth: 100 Hz to 10 kHz
- Accuracy: 5% of setting
MODULATION TYPES
- 1 kHz Tone Private Line Digital Private Line (w/ DPL (Invert) Single Tone DTMF Two-Tone Paging 5/6 Tone Paging POCSAG External Inputs from both a supplied microphone and BNC input.
Receiver (Transmitter test)
- Frequency Range: 250 kHz – 1 GHz (3 GHz optional)
SENSITIVITY
- Narrowband FM: 2.0 uV for 10 dB EIA SINAD
- Wideband FM: 10 uV for 10 dB EIA SINAD
- AM: 10 uV for 10 dB EIA SINAD
RF I/O PORT
- VSWR: < 1.2 to 2 GHz ≤ 1.5 to 3 GHz
- Max Power: 50 W for 5 minutes 150 W for 30 seconds (30 sec. on 5 min. off)
- Absolute Max Power: 150 W
- Alarm: Internal temperature alarm
ANTENNA PORT
- Maximum Power: 0 dBm
- Alarm: 10 dBm
- IF FILTERS: 6.25 kHz 12.5 kHz 25 kHz 50 kHz 100 kHz 200 kHz
FREQUENCY ERROR MEASUREMENT
- Type of Display: Autoranging
- Resolution: 1 Hz
FM DEVIATION MEASUREMENT
- Demodulation Range: Up to ±75 kHz
- Accuracy: ±5% plus peak residual FM
- Frequency Response: Selectable per the following:
- Low Pass Filters: 300 Hz 3 kHz 20 kHz
- High Pass Filters: 1 Hz 300 Hz 3 kHz
Demodulation
- Output Level: 6.25 kHz B/W: 2.56V / 1 kHz
- 12.5 kHz B/W: 1.28V / 1 kHz
- 25 kHz B/W: 0.64V / 1 kHz
- 50 kHz B/W: 0.32V / 1 kHz
- 100 kHz B/W: 1.6V / 10 kHz
- 200 kHz B/W: 0.8V / 10 kHz
Demodulation Output
- Amplitude Flatness: 11 Hz to 7.92 kHz ±1.25 dB 5 Hz to 20 kHz ±2 dB
Demodulation
- Output Impedance: 100 ohms nominal
AM MODULATION MEASUREMENTS
- Demodulation Range: 0 to 100%
- Accuracy: ±5% for levels below 80%
- Frequency Response: Selectable per the following:
- Low Pass Filters: 300 Hz 3kHz 20kHz
- High Pass Filters: 1 Hz 300 Hz 3 kHz
Demodulation
- Output Level: 0.8 V peak per 10% AM Modulation
Demodulation Output
- Amplitude Flatness: 11 Hz to 7.92 kHz ±1.25 dB 5 Hz to 20 kHz ±2 dB
- Output Impedance: 100 ohms nominal
DISTORTION METER
- Range: 1% to 20%
- Distortion Accuracy: The greater of: ±0.5% of distortion or ±10% of reading
- Input Level: 0.1 V RMS min
2024-02-23 11:55:18
Page: 4
Reviews
No customer reviews for the moment.