SS-080-D90K ROHN Self-Supporting tower 80 ft (24 m). SSV HEAVY DUTY Series

ROHN SSV towers have been in service for over 50 years with tubular legs with angled arms at the bottom and solid at the top.

The SSV Heavy Duty line is fully hot-dip galvanized inside and out for high corrosion protection.

Used for various industry-preferred applications including broadcasting PCS security sports lighting and many more.

The pre-engineering design of its parts makes all of the standards.

-90 MPH (145 KM/H)

-Tower height: 80 ft (24.4 m)

-Tower model: SS080D90.

-Tower weight (lbs):1704

-Effective projected area (ft2)

-Top of the tower round / flat: 12.5 / 7.5

-9m (30’) below the top round /flat: 15.8 / 9.5

-Top section: 3WN.

-Bottom section: 6N.

1. Tower designs are in accordance with ANSI / EIA-222-F approval (no ice). 

2. Flat dish antenna areas equivalent to EIA RS-222-C should not exceed the areas shown in the tables.

3. The effective projected areas are assumed to be symmetrical loads on the tower.

4. Designs assume one 7/8 line to tip or 2 lines 7/8 to 9m (30 ft) down from the tip one line for each face.

5. All towers include a top plate with conical supports for 2 3/8 ”(6 cm) and 14” (35.6 cm) free-length pipe. 

6. Foundation details and assembly diagrams are included with the tower.

7. Custom designs for specific site applications are available upon request.

Ask for delivery time.

2023-11-29 15:55:31

Page: 7