RAMSEY COM-3010 RAMSEY Radiocommunications Service Monitor 100 KHz - 1.0 GHz 100 W max

Radiocommunications Service Monitor 100 KHz-1.0 GHz 100 W max.
Now you can equip your laboratory with your monitor that has the functions and accuracy of analyzers that cost up to 4 times more.

• Power Meter: Automatically connects to a dummy load build-in for measurements up to 100 Watts
• Screen: 2 Graphic Fluorescent Screens to the void 16 x 140 pixels 
• Flash Drives: Complete system for Flash drives 100 sequences of 100 records 
• Mode of Scan: Allows the tracking of 100 stored frequencies
• Meter of SINAD: Verifies the sensibility of your radios without requiring additional equipment
• Counter of Frequency: It shows the frequency received and the error of range
• of 100 kHz 3 - 1.0 GHz
• Battery Meter: It shows on the screen the charge of the battery the one that allows operation of the equipment during an hour
• Self-calibration Meter of RSI: It shows the intensity signal (RSSI) within a range of - 120 dBm to - 40 dBM

GENERATOR MODE

• Frequency: 100 kHz - 1.0 GHz in steps of 1 Hz
• Stability: ± 0.1 ppm standard
• Output: RF: -140 dBm to 0 dBm in steps of 0.1 dBm
• Precision: ± 1 dB of 500 kHz to 1 GHz ± 2 dB of 100 kHz to kHz
• Units: dBm mV
• Modulation FM: ± 75 kHz plus in steps of 0.1 Hz
• AM Bandwidth: 10 Hz - 10 kHz
• Precision: ± 5%
• Distortion: less to 5%

Modulations

• Internal: 0.1 Hz - 3 kHz
• External: 0.1 Hz - 3 kHz
• Coding of tones CTCSS: 0.1 Hz - 999.9 Hz with a deviation of frequency variable of 0.1 Hz to 2 kHz 
• Coding of tones DCS: Generates the standard digital tones  with a fixed deviation of ± 750 Hz

RECEPTOR MODE

• Frequency: 100 kHz - 1.0 GHz in steps de 10 Hz
• Sensibility: Less to 2 mV below of 512 MHz less to 3 mV up to 512 MHz
• Modulation FM: 0 - 7 kHz 0-4 kHz 
• Modulation AM 0-100%
• Decoding CTSS: (in auto frequency count)
• Frequency error: 0-1 MHz by 2 methods. Counter and bar graph

Frequency Count

• Range: 100 kHz - 1 GHz
• Low band Sensibility: Less to 5 mV below 50 MHz less to 10 mV above 70 MHz resolutions of 1 Hz and 10 Hz
• High band Sensibility: Less to 6 mV above 200 MHz less to 10 mV between 70 and 200 MHz. Resolutions from 10 Hz to 100 Hz

General Features

• Input to the receiver: Contains diode protection and fuse
• Battery duration: 1.5 hours expandable to 4.5 hours
• Controls: Membrane elastic type
• Dummy load: 100 Watts connected to the output of RF and the output. attenuated of 30 dB in the backside 25 % d endless cycle to 100 Watts
• Power Supply: 100 - 240 VAC 0.6 Amp. 50/60 Hz: In-build internal battery 
• Operating Temperature: -30 to 50° C

2024-10-22 13:25:25

Page: 3

COM3010 RAMSEY RAMSEY Radiocommunications Service Monitor 100 KHz - 1.0 GHz 100 W max COM-3010