- New
- Out Of Stock - info [email protected]
![C5100B](https://cdn-kzkuszewn2kp.vultrcdn.com/9152-large_default/c5100b.jpg)
THE SECRET BEHIND QUICKSORT™
QuickSort 4 (QS4) uses Electrochemical Dynamic Response with Multi-dimensional Normalization to sort Li-ion batteries into Good and Poor. QS4 does not use Q-codes but requires entering battery capacity and voltage. The pass/fail capacity can be selected from 60–90% Test time is 4 minutes.
Low charge and capacity-loss appear similar. The patent pending QS4 separates these two characteristics and reads capacity with state-of-charge of 20% and above.
Three action keys make the operation intuitive:
A full service provides capacity readout in mAh and calibrates smart batteries.
Cellphone users are asking for better in-store services driven largely by lack of visibility into the health of their batteries. With current and potential new customers feeling helpless that their batteries don’t hold as much charge as they used to they are turning to the internet and finding information that doesn’t solve their individual battery problems. The C5100B removes the guesswork of low runtimes in cell phones and turns you and your staff into battery experts. Testing the battery gives the user a clear assessment of battery performance in 4 minutes.
The Cadex C5100B cellphone battery analyzer imroves customer care increases revenue by creating a captive audience in your store during the 4-minute test and reduce your environmental footprint by decreasing the number of batteries prematurely discarded.
As an alternative apps are available that provide SoC and SoH estimations in mobile phones. These software solutions appear to work at first but inaccuracies develop once the device is broken in. This coincides with aging once the unit has been in use for a while when battery fade becomes apparent. QS4 takes a "snapshot" of the chemical battery to give a true picture of battery SoH unencumbered of peripheral readings that lose the ability to track the battery over time. AWAKING SLEEPING LI-ION BATTERIES
|
Application | Single-station lithium-ion battery tester | ||
Range | 3.6V and 7.2V nominal 2A 8W charge and discharge. Polarity protected. Analyzer automatically choses a lower C-rate when exceeding 2A. | ||
Battery Adapter | Includes one adapter of your choice (e.g. RigidArm FlexArm or SmartConnect). Also takes SnapLock™ adapters; auto-scales when exceeding wattage/current setting. Read-only function; programmable with PC-BatteryStore™; temperature sensor. (The limited power of the C5100 may prolong service.) | ||
QuickSort™ | QS1 (600–1 500mAh) QS3 (use of Q-codes) and QS4 (generic user-entry of voltage and mAh). QS4 services 3.6V Li-ion up to 4 000mAh with a state-of-charge of 20% and above. | ||
Line Voltages | 100-240VAC 50/60Hz | ||
Programs | TEST: 4 minutes QuickSort™ CHARGE: 3-hour fast charge CYCLE: Charge/discharge/charge BOOST: Reactivates batteries | ||
Display | 2x20 backlit; Run Ready Fail signal lights | ||
Data Ports | USB RS232 for unit upgrades | ||
Physical | H 92mm (3.6”); W 160mm (6.3”); L 285mm (11.2”); 0.82kg (1.8lb.) net C-ABS housing | ||
Approvals | CSA/UL/EN60950 CE mark RoHS WEEE | ||
Warranty | Two (2) year material and workmanship |
Expandability | One unit per PC |
Computer requirements | Windows O/S Ethernet connection 1.2 GHz processor 512 MB RAM 10 GB storage memory |
2024-02-23 11:55:36
Page: 8
No customer reviews for the moment.