SC20400 TRANSCRYPT LMR Transcript Scambler Compatible with Kenwood Encripcion - FlashCall propietary Signaling Protocol

Offers the ability to install high quality voice security into hundreds of
makes and models of two-way radios. The SC20-400 can effectively be
used with repeaters and control equipment trunked or conventional. Allows the SC20-400 to continue to operate even if the radio signal
is interrupted. Traditionally scramblers can take seconds to recover
a lost signal caused by a hand-off step-on marginal signal
or a fade. With continuous operation the SC20-400 recovers
almost immediately after the signal is restored. Provides clear natural sounding speech and excellent voice
recognition while operating in the secure mode. Allows security codes to be changed by remote commands
while radios remain in the fi eld and operational. Provides the ability to disable radios that have been lost or
stolen. A disabled radio will be unable to receive or transmit
messages thus eliminating any advantage an undesired listener
would gain from stealing a radio. Size (L x W x D) 1.3” x 0.9” x 0.2”
 (33 mm x 23 mm x 5 mm)
Operating Temperature -22° to 140° F (-30° to 60° C)
Receive Coded / Clear 50 to 2500 mV P-P
Transmit Coded / Clear 50 to 2500 mV P-P
Supply Voltage 6 to 30 Vdc regulated to 5 Vdc
Current Drain < 8 mA
SECURITY SPECIFICATIONS
Scrambling Method Low level CVP® single inversion
 frequency
Scramble Codes 256
Master Codes > 1 billion
Code Storage Size 16 codes (selectable)
Transmit Coded / Clear Manual select
Receive Coded / Clear Manual Select
Interoperability SC20-400 -410 -416 -430 -460
FEATURES / OPTIONS
Coded / Clear Switch Options One / two button momentary or
 toggle switch
Coded / Clear Indication Connection available for LED indicator
Scramble Code Select Connection available
Programming Method Over-the-Air-Reprogramming (OTAR)
Signaling Method FlashCall
Emergency Connection available
RADIO SYSTEMS MANAGEMENT
ANI 4 digit 0000 to EFFF
Emergency Retry until acknowledged
Status 128 conditions
Selective Calling Yes
Individual 61 440 IDs
Group 255 groups
Fleet 16 fleets
Over-the-Air Features (Modem Required) TR30-3060 / TR30-3061
Over-the-Air-Reprogramming (OTAR) Yes
Enable / Disable Radio Yes
Change Encrypt Codes Yes
Change ANI Group Fleet Yes
Force Coded / Clear Yes
Export Minimal export requirements
All specifications are typical and subject to normal manufacturing tolerances.
  SC20-400 Most radios
KW20-400 Kenwood TK-2140 / TK-3140
KW21-400-M Kenwood TK-5710 TK-7160 / TK-8160
 TK-7180 / TK-8180 TK-8189 (plug-in)
KW21-400-P Kenwood TK-2170 / TK-3170 TK-2180 /
 TK-3180 TK-3173 TK-5210 (plug-in)
IC20-400 Icom IC-F3 / GS / GT IC-F33GS / GT IC-F4 /
 GS / GT IC-F43GS / GT / TR
MO80-400 Motorola Pro Series (mobiles and portables)
MO81-400 Motorola P-Series radios PRO3150 PO40 /
 PO80 CT250 / CT450 GP308
MO82-400 Motorola portable radios EX500 GP328 Plus
 PRO5150 Elite
MO83-400-SMC Motorola CM200 CM300 EM400 PM400
MO83-400-SPC Motorola CP140 EP450 PR400
MO83-400-WM Motorola CM200 CM300
MO83-400-WP Motorola EP450 PR400
MO94-400-H Motorola HT1000
MO94-400-M Motorola MT2000
MO94-400-M1 Motorola MTX series
MO94-400-M2 Motorola MT2000 / MTS / MCS
MO94-400-M3 Motorola GP900 (99 channel)
MO94-400-M4 Motorola GP900 (new)
MO94-400-MT2 Motorola GP1200 / GM1200
MO95-400-01 Motorola HT1000 (with socket)
MO96-400 Motorola VISAR™
MO97-400 Motorola GM350
MO97-400-STA Base station 400 (compatible)
Call for new releases. Features and options may vary

2024-02-23 11:55:20

Page: 4