0 Review(s) 
FSP200KIT1 TEMPO Active Core Fusion Splicer with Fiber Cleaver FSP200-KIT1
Sorry, This item is out of stock.

FSP200-KIT1 TEMPO Active Core Fusion Splicer with Fiber Cleaver


The FSP200 optical fusion splicer uses core alignment technology allowing the technician to reliably fuse fiber optic cables with low splice losses in as little as seven seconds. The intuitive user interface keeps the learning curve short and enables the technician to be productive quickly. FTTx P2P installations and all standard fibers are supported with pre-qualified splicing profiles that can be modified and stored for more demanding fiber applications.

The FSP200 uses the Tempo Communications Splice on Connector which provides a low loss low return loss and reliable connection that surpasses the failure-prone mechanical connector. Splice-on connectors also allow for easier fiber routing reducing fiber preparation since the splice-on connector is pre-cleaved and eliminates the need for a splice tray.

The FSP200 is available in the popular Contractor kit which bundles the fusion splicer cleaver an extra battery and fiber strippers so that the technician has all the tools they need.



  • Core Alignment
  • Lowest insertion loss splicing technology
  • Seven seconds splicing
  • Five-second boot time
  • 150 complete cycles per battery charge
  • Compact and lightweight for the most demanding jobs
  • Compatible with loose tube fibers
  • Screenshot capable
  • Drop tested to 76cm
  • Eighteen-second shrink time
  • 5 000 burns electrode life
  • Attenuation mode capable
  • Password protection for anti-theft
  • Compatible with splice on connectors SC LC FC and ST
  • IP52 compliant



  • FSP200 Optical Fusion Splicer 
  • FCL200 Optical Fiber Cleaver for 48 000 Cleaves
  • Yellow carrying case
  • Tweezers
  • Extra set of electrodes
  • USB cable
  • 250µm adapters (pair)
  • 900µm adapters (pair)
  • SC/LC SOC Adapter
  • Splice on the connector over the insert.
  • Allen key
  • Power supply
  • Line cord
  • Carrying strap
  • Cooling tray
  • Battery
  • Electrode Cleaner



Attribute Name Attribute Value
Applicable Fibers SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF
Fiber Cleaved Length 10mm
Cladding Diameter 100 to 1000µm
Fiber Count Single
Fiber Aligning Method Core Alignment
Splice Loss (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF)
Splicing Mode 60 Preset / User Definable Modes
Splice Time 7 seconds
Boot Time 5 seconds
Number of Splices Per Battery Charge 200 (including 60mm heat shrink cycle)
Splice Connector SC LC FC ST
Arc Calibration Mode Automatic & Manual
Protection Sleeve Length 60mm 40mm Micro Sleeves
Ingress Protection IP5X (Dust); IPX2 (Water)
Storage of Splice Results 5 000 Results 100 screenshots
Drop Test 76cm on five axis
Tension Test 2N
Fiber Display Magnification 200x
Tube Heating Time 18 seconds
Attenuator Mode 0.1 to 15 dB
Electrode Life 5 000 Splices
Display 3.5” Color Turn-Over LCD
Connectivity USB
Storage Temperature -40 to 158F (-40 to 70C)
Operating Conditions Pressure: 0 to 16 404 feet (0 to 5 000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to 131F (-20 to 55C)
Power Supply 100 to 240V AC Adapter; Li-ion Battery (4400 mAh)
Weight 3.74lbs (1.7kg) with battery
Dimensions 4.9” x 4.9” x 5.3” (125 x 125 x 135mm)
Vibration Resistance 10Hz – 500Hz with a spectral density of 0.03 g2/Hz
Password Protection Yes

2024-02-23 11:55:03

Page: 1



No customer reviews for the moment.

Write your review


FSP200KIT1 TEMPO Active Core Fusion Splicer with Fiber Cleaver FSP200-KIT1

Write your review