BELDEN 9913/1000 Belden Cable Duobond II Shield 90% Tinned Copper Braid Insulation: Polyethylene Semi-Solid

Bare copper conductor 10 AWG .108 " semi-solid polyethylene insulation Duobond® II tinned copper braid shielding (90% coverage) PVC cover.

Advantage :

• Coaxial that complies with the RG8 / U standard
• Pure copper conductor and solid type for less attenuation (multi-filar version: 9913F)
• Polyethylene insulation for better propagation speed (84%)
• Double shielding:
• Aluminum sheet attached to the insulation to prevent wrinkles in the connectorization ("bonded duo foil" Belden patent)
• 90% dense mesh to avoid interference noise copper (maximum conductivity) with tin bath (to prevent moisture from entering).
• Low loss (series "low loss" of Belden): at 30 meters only 2.6dB 400Mhz
• High power: 619 Watts 400 Mhz
• High voltage supported 600V RMS
• Minimum capacitance (electrostatic charge): 24.6 picofarads per foot
• Wide temperature range: from -40 to 80
• Supports maximum pulling force: 300 pounds

Features :

• Impedance: 50 Ohms.
• Outside Diameter; .405 in. 10.29mm
• Speed Factor: 84%.
• Attenuation in 30 meters. UHF 450 MHz.2.7 dB.
• Internal conductor AWG gauge: 10 (.108) Solid copper.
• Insulation: Semi-solid polyethylene.
• Shielding: Duobond II 90% tinned copper braided mesh.

Price per reel of 1000 ft.

2024-10-22 13:25:14

Page: 2

99131000 BELDEN Belden Cable Duobond II Shield 90% Tinned Copper Braid Insulation: Polyethylene Semi-Solid 9913/1000